Zanussi ZRB24S8 User Manual download pdf (Page 48)

Changing the opening direction of

the doors

Before carrying out the operations described below,

pull out the mains plug from the wall socket.

To carry out door reversal operate as follows:

1. dismantle the lower hinge (1), and the support

foot (2);

2. unscrew the left front foot (3) and reposition on

the opposite side;

3. Slide out the lower door from middle hinge (H)

and remove the latter;

4. Slide out the upper door from pin (G), unscrew

the latter and then screw it down into the hinge

provided on the opposite side;

5. Remove the two plugs, to reveal the holes for the

hinge pivots, and remount them on the other

side;

6. Refit the upper door and the middle hinge on the

opposite side;

7. Refit the lower door;

8. reassemble the lower hinge (1), and the support

foot (2) on the opposite side;

Important

For the alignement of the doors, adjust the middle

hinge horizontally, after having loosened the two

screws.

Attention

After completion of the door reversibility

operation, verify that the door gasket is adherent

to the cabinet. If the ambient temperature is cold

(i.e. in Winter), the gasket may not fit perfectly to

the cabinet. In that case, wait for the natural

fitting of the gasket or accelerate this process by

heating up the part involved with a normal

hairdrier.

D715 PIED/M

PR60

45°

Rear spacers

The plastic bag containing all relevant

documentation also contains two spacers to be fitted

into special holes in the back of the appliance. Fit

the spacers into the holes, taking care to ensure that

the arrow (A) is positioned as shown in Figure. Then

turn them through 45° (arrow (A) vertical) until they

lock into place.

1 2 ... 43 44 45 46 47 48 49 50 51 52

Comments to this Manuals

No comments

Zanussi ZRB24S8 User Manual Page 48

Comments to this Manuals

Related products and manuals for Combi-fridges Zanussi ZRB24S8