Zanussi DA4341 User Manual download pdf (Page 8)

Levelling

Good levelling is essential for correct closure and sealing of

the door.

When the appliance is correctly levelled, the door will not

catch on the levelling spacers on either side of the cabinet.

If the door does not close correctly, loosen or tighten the

adjustable feet until the machine is perfectly level.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under

a close fitting sink unit or a pre-existing top, providing the

dimensions of the recess correspond to those shown in the

picture.

Proceed as follows:

- Remove the machine’s worktop by unscrewing the

two front retaining screws, pull from the front and

slide out the rear slots, lifting the worktop.

Insert the machine after adjusting height and levelling with

the adjustable feet. When inserting the machine, ensure that

the water inlet and drain hoses are not kinked or squashed.

820

570-600

450

IN04

1 2 3 4 5 6 7 8 9

No comments

Zanussi DA4341 User Manual Page 8