Zanussi DCE5655 UK User Manual download pdf (Page 12)

- 12 -

Something Not Working

The programme will not start.

The dishwasher is not ﬁlling with water.

Water not discharged at end of cycle.

Dishes not washed satisfactorily.

Visible lime deposits or white ﬁlm

on the dishes.

The dishwasher is noisy.

The dishes are not quite dry and are

not shiny.

• Is the door closed properly?

• Have you pressed the On/Off button?

• Is the water tap turned on?

• Is the dishwasher plugged in?

• Has the fuse blown? (Start with fuse in electrical plug).

• Is the delay start-button pressed in?

• Is the previous programme ﬁnished?

(See page 9).

• Is the water tap turned on?

• Has your domestic water supply been cut off temporarily?

• Is the water inlet hose kinked or blocked?

• Is the ﬁlter inside the inlet hose blocked?

• Is the water pressure too low?

• Did you open the door before the indicator light

is lit and the programme cycle ﬁnished?

• Is the previous programme ﬁnished?

(See page 9).

• Are the ﬁlters clogged?

• Has anything prevented the spray arm from rotating?

• Are the spray arm holes clogged?

• Were the dishes packed too close together?

• Are the ﬁlters clogged?

• Are the ﬁlters ﬁtted correctly in place?

• Did you use enough detergent?

• Is the salt container cap properly closed?

• Did you select a programme with too low temperature?

• Is the rinse aid dispenser empty?

• Is the salt container empty or is the water softener not

correctly adjusted?

• Is the rinse aid dispenser adjusted to too low dosage?

• Are the dishes rattling against each other?

• Is the spray arm knocking against the dishes?

Whistling sound when washing.

• This is not a fault, try another brand of detergent.

• Is the rinse aid dispenser empty?

• Have the dishes been left too long inside the dishwasher?

Fault Check

The door is difﬁcult to close.

• Is the dishwasher level?

Before calling out an engineer, please check through the details below because some faults can be rectified easily

without the need to call out an engineer. If an engineer is called to resolve a problem listed below or to repair a

fault caused by incorrect installation or mis-use a charge will be made, even if the appliance is under guarantee.

The top indicator lamp ﬂashes.

The middle indicator lamp ﬂashes.

• Is the water tap turned on?

• Is the ﬁlter inside the inlet hose blocked?

• Is the water inlet hose kinked or blocked?

• Is your domestic sewer system blocked?

Fault Check

If the top or middle indicator lamp is ﬂashing, it is possible that you can solve the problem yourself. When the problem is

solved, press in the On/Off button and the programme continues. If the problem occurs again, contact your local

Service Force Centre. If any other lamps ﬂash contact and inform your local Service Force Centre.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Zanussi DCE5655 UK User Manual Page 12

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi DCE5655 UK