Zanussi ZDC5465 User Manual

822 61 10-52

- 10 -Loading and unloading the dishwasherHow to load the dishesThe illustration shows the dishwasher loaded with sixplace settings. Your own dishes a

- 11 -Cleaning the filtersThere are two filters, a coarse one and a fine one whichshould be cleaned after every wash. Lift out these filterswhich are in t

- 12 -Something Not WorkingThe programme will not start.The dishwasher is not filling with water.Water not discharged at end of cycle.Dishes not washed

- 13 -ServiceNever attempt to repair the dishwasher yourself. Repairs carried out by unauthorized or inexperiencedpersons can cause injury or serious

- 14 -Guarantee ConditionsStandard guarantee conditionsWe, Zanussi Electrolux, undertake that if within 24 months from the date of the purchase this Z

- 15 -Installation instructionsAny electrical work required to install this appliance,should be carried out by a qualified electrician orcompetent pers

- 16 -UnpackingDamagesIf the dishwasher has been damaged during transport,you should immediately notify the company responsiblefor delivering it.If yo

- 17 -PositionThe machine is designed to be built into a cup-board. It isvital to ensure that the machine is positioned on a horizontallevel in order

- 18 -InstallationPreparing the outer doorScrew the guide rods and hinges on the door into placeusing the predrilled holes.Mounting plateBefore instal

- 19 -InstallationFitting the outer door1. Unscrew the screws on the mounting plate. Lift the plate off together with the door.2. Lay the machine down

- 2 -ContentsFor the userSafety Information 3Description of the appliance 4-5- Spray arm- Coarse filter/microfilter- Fine filter- Detergent dispenser- Ri

- 20 -InstallationMounting the dishwasher1. Put the dishwasher into the cupboard and screwthe mounting plate into position from underneathwith 2 screw

- 21 -InstallationWater inletThe dishwasher is equipped with safety featureswhich are to prevent the water from going back to the fresh water system.

- 22 -InstallationWater drainageTo protect the dishwasher against water damageit is equipped with a water safety system. In theevent of a fault the dr

- 23 -Power supplyThe dishwasher is supplied with a lead and electricalplug for connection to a 230 V, 13 A earthed wallsocket. Before any work is car

© Electrolux plc 2003

Before installing and first using the dishwasher, read this instruction booklet carefully, including itshints and warnings. To avoid unnecessary mistak

Description of the appliance- 4 -4 5

- 5 -Spray arm (1)It is important to keep all the holes in the spray arm clear.A clogged hole can seriously affect washing efficiency. If the spray arm

The control panel- 6 -Switching the buzzer offBefore switching the buzzer off all programmes must havebeen completed. 1. Press in the On/Off button.2.

- 7 -Water hardness level °d 1)mmol/l 2)Setting on thewater softenerNumber of light and sound signals > 24 4,218 - 24 3,2 - 4,212 - 18 2

13 minutes- 8 -Programme chartType ofdishesType of soil:• normalysoiled• dried-on food remnants• heavilysoiled• dried-on food remnantsespecially eggwh

- 9 -Starting the programme1. Scrape or rinse off solid food remnants.2. Load the dishwasher. (See the basket and loading).3. Put the correct amount o