Zanussi ZDF211 User Manual download pdf (Page 21)

WARNING!

● Multi-way plugs, connectors and extension

cables must not be used. This could

constitute a fire hazard through overheating.

● If necessary, have the domestic wiring

system socket replaced. In case that the

electrical cable has to be replaced, contact

your local Service Force centre.

● The plug must be accessible after the

appliance has been installed.

● Never unplug the appliance by pulling on the

cable. Always pull the plug.

Fitting under a counter

By removing the dishwasher’s worktop, you

can install it under a close fitting sink unit or a

pre-existing top.

Be sure that once the appliance has been

installed, it is easily accessible for the service

engineer in the event that a repair is required.

Unscrew the two screws

at the rear.

Push the top backwards

about 1 cm.

Lift top at the front and

remove it.

Check if the dishwasher

is levelled.

If not, loosen or tighten

the adjustable feet until

the appliance is

perfectly levelled.

Levelling

Good levelling is essential for correct

closure and sealing of the door.

When the appliance is correctly levelled,

the door will not catch on either side of the

cabinet.

156999071en.qxp 1/24/2006 8:40 AM Pagina 21

1 2 ... 16 17 18 19 20 21 22 23 24

No comments

Zanussi ZDF211 User Manual Page 21