Zanussi ZDI 112 User Manual download pdf (Page 17)

Cleaning the spray arms

NEVER try to remove the spray arms.

If residues of soil have clogged the holes in the

spray arms, remove them with a cocktail stick.

External cleaning

Clean the external surfaces of the machine and

control panel with a damp soft cloth. If

necessary use only neutral detergents. Never

use abrasive products, scouring pads or sol-

vent (acetone, trichloroethylene etc....).

Internal cleaning

Ensure that the seals around the door, the de-

tergent and rinse aid dispensers are cleaned

regularly with a damp cloth.

We recommend every 3 months to run the wash

programme for heavy soiled dishes using de-

tergent but without dishes.

Prolonged periods of non-

operation

If you are not using the machine for any pro-

longed period of time you are advised to:

1. Unplug the appliance and then turn off the

water.

2. Leave the door ajar to prevent the forma-

tion of any unpleasant smells.

3. Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where

the temperature is below 0°C. If this is

unavoidable, empty the machine, close the ap-

pliance door, disconnect the water inlet pipe

and empty it.

Moving the machine

If you have to move the machine (moving house

etc....):

1. Unplug it.

2. Turn the water tap off.

3. Remove the water inlet and discharge ho-

ses.

4. Pull the machine out together with the ho-

ses.

Avoid over tilting the machine during transpor-

tation.

Environmental concerns

Packaging material

The packaging materials are environmentally

friendly and can be recycled. The plastic com-

ponents are identified by markings, e.g. >PE<,

>PS<, etc. Please dispose of the packaging

materials in the appropriate container at the

community waste disposal facilities.

17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Comments to this Manuals

No comments