Zanussi ZDI12010XA User Manual download pdf (Page 22)

Cleaning the filters

1

C

B

A

2

3

4

5

D

6

7

8

To remove filters (B) and (C), turn the handle

counterclockwise and remove. Pull apart filter

(B) and (C). Wash the filters with water.

Remove filter (A). Wash the filter with water.

Before you put the filter (A) back, make sure

that there are no residues of food or soil in or

around the edge of the sump.

Make sure that filter (A) is correctly positioned

under the 2 guides (D).

Assemble filters (B) and (C). Put them back in

filter (A). Turn the handle clockwise until it

locks.

An incorrect position of the filters can

cause bad washing results and damage

to the appliance.

Cleaning the spray arms

Do not remove the spray arms.

If the holes in the spray arms are clogged, re-

move remaining parts of soil with a thin poin-

ted object.

External cleaning

Clean the appliance with a moist soft cloth.

Only use neutral detergents. Do not use abra-

sive products, abrasive cleaning pads or sol-

vents.

Internal cleaning

If you regularly use short duration pro-

grammes, these can leave deposits of grease

and limescale inside the appliance.

To prevent this, we recommend to run long

duration programmes at least 2 times per

month.

Troubleshooting

The appliance does not start or it stops during

operation.

Before you contact the Service, refer to the in-

formation that follows for a solution to the

problem.

With some problems, different indicators

flash continuously or intermittently at

the same time to show an alarm code.

22

www.zanussi.com

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 75 76

Comments to this Manuals

No comments