Zanussi ZDM16301SA User Manual

ENUser manualDishwasherZDM16301SA

Cleaning the filtersImportant! An incorrect position of the filterscan cause bad washing results and damage tothe appliance.1BA2Remove the filters Aan

With some problems, the display showsan alarm code:• - The appliance does not fill with water.• - The appliance does not drain the wa-ter.• - The anti

Technical informationDimensions Width / Height / Depth (mm) 545 / 447 / 480Electrical connection Refer to the rating plate. Voltage 220 - 240 V Freq

13www.zanussi.com

14 www.zanussi.com

15www.zanussi.com

www.zanussi.com/shop 156975040-A-362013

ContentsSafety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

– Farm houses– By clients in hotels, motels and other resi-dential type environments– Bed and breakfast type environments.Warning! Risk of injury.• Do

Indicators DescriptionWashing phase indicator.Drying phase indicator.End indicator.Salt indicator. This indicator is off while the programme operates.

Before first use1. Make sure that the set level of the watersoftener agrees with the water hardness inyour area. If not, adjust the water softener.Con

3Put 1 litre of water inthe salt container(only for the firsttime).456Caution! Water and salt can come outfrom the salt container when you fill it.Ris

A3Fill the detergent dis-penser (A) with de-tergent.B4If you use a washingprogramme with pre-wash phase, putmore detergent in theprewash detergentcomp

3. Close the appliance door. The countdownstarts.• The display shows the countdown of thedelay start that decreases with steps of1 hour.• The wash ind

• Do not put in the appliance items made ofwood, horn, aluminium, pewter and copper.• Do not put in the appliance items that canabsorb water (sponges,