Zanussi ZDT12011FA User Manual download pdf (Page 40)

Options

Half-load

Activate or deactivate this option before

the start of a programme. You cannot ac-

tivate or deactivate this option while a pro-

gramme operates.

Set this option when you want to wash a small

quantity of tableware and cookware. This op-

tion decreases the programme duration and

the consumption of energy and water.

Load the upper basket and the lower basket

and decrease the quantity of detergent.

This option is not applicable to

and

.

Acoustic signals

The acoustic signals operate when the appli-

ance has a malfunction and it is not possible

to deactivate them.

There is also an acoustic signal that operates

when the programme is completed. By default,

this acoustic signal is off, but it is possible to

activate it.

How to activate the acoustic signal for

the end of programme

1. Press the on/off button to activate the ap-

pliance.

2. If necessary, do the Reset function.

3. Press and hold the programme button until

the programme indicator

starts to

flash and the programme indicator

comes on with fixed light.

4. Press immediately the programme button.

•

The programme indicator

comes

on with fixed light.

•

The programme indicator

starts

to flash.

5.

Wait until the programme indicator

goes off. The programme indicator

continues to flash.

6. Press the programme button. The end indi-

cator comes on. The acoustic signal for the

end of programme is activated.

7. Press the on/off button to deactivate the

appliance and to confirm the setting.

How to deactivate again the acoustic

signal for the end of programme

1. Refer to “How to activate the acoustic sig-

nal for the end of programme” and follow

the procedure from step (1) to step (5).

The end indicator is on.

2. Press the programme button. The end indi-

cator goes off. The acoustic signal for the

end of programme is deactivated.

3. Press the on/off button to deactivate the

appliance and to confirm the setting.

Before first use

1. Make sure that the set level of the water

softener agrees with the water hardness in

your area. If not, adjust the water softener.

Contact your local water authority to know

the water hardness in your area.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Processing residues can stay in the appli-

ance. Start a programme to remove them.

Do not use detergent and do not load the

baskets.

40

www.zanussi.com

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 75 76

Comments to this Manuals

No comments