Zanussi ZDV12001FA User Manual

ENUser manualDishwasherZDV 12001

Cleaning the filters1CBA23To remove filters (B)and (C), turn the han-dle counterclockwiseand remove. Pullapart filter (B) and(C). Wash the filterswith

Alarm code Problem• The indicator of the set programme flashes contin-uously.• The end indicator flashes 3 times intermittently.The anti-flood device

Problem Possible cause Possible solution Incorrect position of the items in thebaskets. Water could not wash allitems.Make sure that the position of

Water supply 1)Cold water or hot water2)max. 60 °CCapacity Place settings 91) Connect the water inlet hose to a water tap with a 3/4'' threa

14 www.zanussi.com

15www.zanussi.com

www.zanussi.com/shop 117925360-B-042012

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 3Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

change the fuse in the mains plug, use a 13amp ASTA (BS 1362) fuse.Use• This appliance is intended to be used inhousehold and similar applications suc

Control panelBA21341On/off button2Programme indicators3Indicators4Programme button.Indicators DescriptionEnd indicator.Salt indicator. This indicator

OptionsAcoustic signalsThe acoustic signals operate in these condi-tions:• When the programme is completed.• A malfunction occurs to the appliance.Fac

Water hardnessWater softeneradjustmentGermandegrees(°dH)Frenchdegrees(°fH)mmol/l ClarkedegreesManual Elec-tronic51 - 70 91 - 125 9.1 - 12.5 64 - 882 1

1 23Put 1 litre of water inthe salt container (on-ly for the first time).456Filling the rinse aid dispenserCaution! Only use rinse aid fordishwashers.

5. Add the detergent.6. Set and start the correct programme for thetype of load and the degree of soil.Loading the basketsRefer to the supplied leafle

detergent, rinse aid and dishwasher salt,do these steps:1. Press the on/off button to activate the appli-ance.2. Set the water softener to the highest