Zanussi ZDV15006FA User Manual

GETTING STARTED?EASY.User ManualZDV15006FAEN User ManualDishwasher

ADDING DETERGENT21If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliancedoor.ADDING MULTI-TABLETS2

Option XtraDryActivate this option to boost the dryingperformance. With XtraDry on, the duration of someprogrammes, water consumption and the last rin

agents), rinse aid and salt separately for optimalcleaning and drying results.• At least once a month run the appliance with theuse of appliance clean

CLEANING THE FILTERSBAC• Make sure that there are no residues of food or soil in or around the edge of the sump.• Put back in place the flat filter (C

The majority of problems that can occur canbe solved without the need to contact anAuthorised Service Centre.Problem and alarm code Possible cause and

Problem and alarm code Possible cause and solutionThe appliance trips the circuit-beaker.• The amperage is insufficient to supply simultaneously all t

Problem Possible cause and solutionThe interior of the appliance iswet.• This is not a defect of the appliance. it is caused by the hu-midity in the a

Capacity Place settings 9Power consumption Left-on mode (W) 5.0Off-mode (W) 0.501) Refer to the rating plate for other values.2) If the hot water come

18

19

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for

WWW.ZANUSSI.COM/SHOP156925321-A-402018

• If the supply cord is damaged, it must be replaced by themanufacturer, its Authorised Service Centre or similarlyqualified persons in order to avoid

• The water inlet hose has a safety valve and asheath with an inner mains cable.WARNING! Dangerous voltage.• If the water inlet hose is damaged, immed

EASY START134 5 6 7 8921On/off button2Display3Programme button (up)4Programme button (down)5TimeManager button6XtraDry button7Delay button8CANCEL butt

ProgrammeDegree of soilType of loadProgramme phasesConsumption values1)Duration(min)Energy(kWh)Water(l)P1Eco 2)Normal soilCrockery andcutlery• Prewash

CANCEL PROCEDUREUse CANCEL to:• Cancel a currently running programme.• Stop the countdown of Delay option.• Bring the appliance back to the programmes

DEACTIVATING THE RINSE AID EMPTYNOTIFICATIONMake sure the appliance is in user mode.1. Press .• The indicators , and are off.• The indicator s

The salt is used to recharge the resin in the watersoftener and to assure good washing results indaily use.Adding saltBefore the first use, put one li