Zanussi ZFT11114WA User Manual download pdf (Page 20)

Problem Possible cause Solution

The door is not closed correctly. Refer to "Closing the door".

The food products' temperature

is too high.

Let the food products tempera-

ture decrease to room tempera-

ture before storage.

Many food products are stored at

the same time.

Store less food products at the

same time.

The thickness of the frost is

greater than 4-5 mm.

Defrost the appliance.

The door has been opened often. Open the door only if necessary.

There is no cold air circulation in

the appliance.

Make sure that there is cold air

circulation in the appliance.

If the advice does not lead to the

desired result, call the nearest

Authorized Service Centre.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective door

gaskets. Contact the Authorised Service

Centre.

Installation

WARNING!

Refer to Safety chapters.

Positioning

This appliance can be installed in a dry, well

ventilated indoor where the ambient

temperature corresponds to the climate class

indicated on the rating plate of the appliance:

Climate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Some functional problems might

occur for some types of models

when operating outside of that

range. The correct operation can

only be guaranteed within the

specified temperature range. If you

have any doubts regarding where to

install the appliance, please turn to

the vendor, to our customer service

or to the nearest Authorised Service

Centre.

Levelling

When placing the appliance ensure that it

stands level. This can be achieved by two

adjustable feet at the bottom in front.

20 www.zanussi.com

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Comments to this Manuals

No comments

Zanussi ZFT11114WA User Manual Page 20

Comments to this Manuals

Related products and manuals for Freezers Zanussi ZFT11114WA