ENUser manualFridge FreezerZRB934EW
Problem Possible cause SolutionWater flows on the ground. The melting water outlet does notflow in the evaporative tray abovethe compressor.Attach the
best performance, if the appliance is positionedbelow an overhanging wall unit, the minimumdistance between the top of the cabinet andthe wall unit mu
ABCDEImportant! The wires in the mains lead arecoloured in accordance with the followingcode:A Green and Yellow: EarthC Brown: LiveD Blue: NeutralAs t
• Open the doors.Unscrew the middlehinge (B). Removethe plastic spacer(A).• Remove the spacer(F) and move to theother side of thehinge pivot (E).• Rem
14 www.zanussi.com
15www.zanussi.com
www.zanussi.com/shop 280150738-A-192012
ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 4Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• It is dangerous to alter the specifications ormodify this product in any way. Any damageto the cord may cause a short-circuit, fireand/or electric s
• The appliance must not be located close toradiators or cookers.• Make sure that the mains plug is accessibleafter the installation of the appliance.
9Door shelf10Bottle shelf11Freezer basket12Maxibox basket13Frostfree basket14Cold module15Rating plateControl panel1 25 4 31Temperature indicator LED2
Important! Do not use detergents or abrasivepowders, as these will damage the finish.Daily useFreezing fresh foodThe freezer compartment is suitable f
Removal of freezing baskets from thefreezerThe freezing baskets have a limit stop to pre-vent their accidental removal or falling out. Atthe time of i
• water ices, if consumed immediately after re-moval from the freezer compartment, canpossibly cause the skin to be freeze burnt;• it is advisable to
tion, neither on the internal walls nor on thefoods.The absence of frost is due to the continuouscirculation of cold air inside the compartment,driven
Comments to this Manuals