Zanussi ZI7280D User Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 14
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
12
Colocar a presi—n el cubrejuntas entre el aparato y
el mueble.
Colocar les tapas (B) sobre los extremos del perfil y
en los agujeros para la bisagra.
D724
D726
B
Empujar el aparato en el hueco inasta que el perfil
superior (A) llegue a tope con el mueble.
Abrir la puerta y adosar el aparato contra el lado del
mueble al lado opuesto a la bisagra de la puerta.
Fijar el aparato con los 4 tornillos en dotaci—n. Colo-
car la parrilla de aireaci—n (C) encaj‡ndola a presi—n
y engornar la tapa (D) en posici—n.
A
D015
D728
D
C
17
Cleaning the interior
Before using the appliance for the first time, wash
the interior and all internal accessories with luke-
warm water and some neutral soap so as to remove
the typical smell of a brand-new product, then dry
thoroughly.
Do not use detergents or abrasive
powders, as these will damage the finish.
Operation
Insert the plug into the wall socket.
Open the refrigerator door and turn the thermostat
knob, clockwise, beyond the ÇOÈ (STOP) position.
The appliance will start to operate.
Temperature regulation
The temperature is automatically regulated and can
be increased to achieve a higher temperature
(warmer) by rotating the thermostat knob toward
lower settings or reduced (colder) rotating the knob
towards higher settings.
However, the exact setting should be chosen
keeping in mind that the temperature inside the
refrigerator depends on:
¥ room temperature;
¥ how often the door is opened;
¥ the quantity of food stored;
¥ location of appliance.
A medium setting is generally the most suitable.
Important
If the ambient temperature is high or the
appliance is fully loaded, and the appliance is
set to the lowest temperatures, it may run
continuously causing frost to form on the rear
wall. In this case the dial must be set to a higher
temperature to allow automatic defrosting and
therefore reduced energy consumption.
USE
Page view 11
1 2 ... 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments