Zanussi ZR171UN User Manual Page 1

FRIGORIFEROREFRIGERATORKÜHLSCHRANKREFRIGERATEURZR 171 UN LIBRETTO ISTRUZIONI INSTRUCTION BOOKLET GEBRAUCHSANWEISUNG MODE D’EMPLOI 222

21USEOperationInsert the plug into the wall socket.Open the refrigerator door and turn the thermostat knob, clockwise, beyond the «O» (STOP) position.

22Movable shelvesThe walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.Ice-cube product

23MAINTENANCEUnplug the appliance before carrying out any maintenance operation.Periodic cleaningClean the inside with warm water and bicarbonate of s

13WARNINGSGeneral Safetyª This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with

14CONTENTSInstallation 15ª Positioning 15ª Cleaning the interior 15ª Location 16ª Door reversibility 16ª Fitting a decorative door panel 17ª Electrica

15INSTALLATIONIf this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sur

16 LocationThis appliance is designed to be built-in to a space having the dimensions given in Fig. 1.The height of the appliance can be altered if re

17Take the hinge removed from the upper part of the appliance on the opposite side (see Fig. 4), and, using the screws removed from the lower part, fix

18Lay the panel face down (Fig. 6). Position the top bracket on the panel, making sure that there is an equal distance between it and the sides and th

19Check the position again by slackening the screws and pins then, once the best position has been obtained, fully tighten all the fixings.Cover the vi

20If the appliance has been fitted into a space 870 mm high and the maximum height of the base plate is 150 mm, fit the front cover plate as described i