ENZRG16605XAUser ManualRefrigerator
2413LevellingWhen placing the appliance ensure that itstands level. This can be achieved by twoadjustable feet at the bottom in front.LocationCAUTION!
12310. Tighten the hinge.11. Put the top in position.12. Push front the top.13. Screw both screws on the rear side.14. Remove and install the handle o
letter “E“ or by the earth symbol orcoloured green and yellow.2. Connect the wire coloured blue to theterminal either marked with the letter “N“ orc
www.zanussi.com 13
14 www.zanussi.com
www.zanussi.com 15
www.zanussi.com/shop212000986-A-032015
ContentsSafety information 2Safety instructions 3Operation 4First use 5Daily use 5Hints and tips 5Care and cleaning 6Troubleshooting 7Installation 9Te
• Do not use mechanical devices or other means to acceleratethe defrosting process, other than those recommended by themanufacturer.• Do not damage th
UseWARNING!Risk of injury, burns, electrical shockor fire.• Do not change the specification of thisappliance.• Do not put electrical appliances (e.g.
However, the exact setting should be chosenkeeping in mind that the temperature inside theappliance depends on:• room temperature• how often the door
• A faint click noise from the temperatureregulator when the compressor switches onor off.Hints for energy saving• Do not open the door frequently or
The equipment has to be cleaned regularly:1. Clean the inside and accessories withlukewarm water and some neutral soap.2. Regularly check the door sea
Problem Possible cause SolutionThe compressor operates contin-ually.Temperature is set incorrectly. Refer to "Operation" chapter. Many food
Problem Possible cause SolutionThe door has been opened of-ten.Open the door only if necessary.There is no cold air circulationin the appliance.Make s
Comments to this Manuals