Zanussi ZDK320X User Manual download pdf (Page 12)

Product description

Cooking surface layout

180

145

1 Rear cooking zone 1700 W

2 Front cooking zone 1200 W

3 Power indicator

4 Control knobs

Electric cooking zones control knobs

Symbol Function

0 off position

Symbol Function

1 minimum heat

6 maximum heat

Operation

To switch on and increase the heat setting turn the knob

counterclockwise. To decrease the heat setting turn the

knob clockwise. To switch off turn the knob to the 0.

Power indicator is activated when either of the zones are

turned on, and will stay on until the cooking zones are

switched off.

Before first use

Put cookware containing water on each cooking zone, set

the maximum position and operate the appliance for 10

min. This is to burn off the residue in the appliance. After

that, operate the appliance at minimum position for 20

min. During this period, an odour and smoke can occur.

This is normal. Make sure that the airflow is sufficient.

Helpful hints and tips

Cookware

• The bottom of the cookware must be as thick and

flat as possible.

• Cookware made of enamelled steel and with alu-

minium or copper bottoms can cause discolora-

tion on glass ceramic surface.

Energy saving

• If possible, always put the lids on the cookware.

• Put cookware on a cooking zone before you start

it.

• Stop the cooking zones before the end of the

cooking time to use residual heat.

• The bottom of pans and cooking zones must

have the same dimension.

Use pots and pans with bottom applicable to the di-

mension of the cooking zones.

Cooking zone Diameters of cookware

Front max. 145 mm

Rear max. 180 mm

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comments to this Manuals

No comments

Zanussi ZDK320X User Manual Page 12

Comments to this Manuals

Related products and manuals for Hobs Zanussi ZDK320X