GETTING STARTED?EASY.User ManualZGG66424BAZGG66424XAEN User ManualHobGB IE JO MT
A) supplied sealB) supplied brackets10.11.CAUTION! Install the appliance onlyon a worktop with flat surface.POSSIBILITIES FOR INSERTIONThe panel insta
CONTROL KNOBSymbol Descriptionno gas supply / off positionignition position / maximumgas supplySymbol Descriptionminimum gas supplyDAILY USEWARNING! R
2. Keep the control knob pushed for equal or lessthan 10 seconds. This lets the thermocouplewarm up. If not, the gas supply is interrupted.3. Adjust t
CARE AND CLEANINGWARNING! Refer to Safety chapters.GENERAL INFORMATION• Clean the hob after each use.• Always use cookware with a clean base.• Scratch
WHAT TO DO IF...Problem Possible cause RemedyThere is no spark when you tryto activate the spark generator.The hob is not connected to anelectrical su
C. Stick it on instruction booklet.TECHNICAL DATAHOB DIMENSIONSWidth 594 mmDepth 510 mmBYPASS DIAMETERSBURNER Ø BYPASS 1/100 mmTriple Crown 57Semi-rap
WARNING! This appliance does notfunction with the existing gas settingsif installed in Malta. Therefore, beforeconnecting the appliance it is essentia
• If it is possible, use a pressure cooker. Refer to its user manual.ENVIRONMENTAL CONCERNSRecycle materials with the symbol . Put thepackaging in re
SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for
WWW.ZANUSSI.COM/SHOP867329021-F-392018
• NEVER try to extinguish a fire with water, but switch off theappliance and then cover flame e.g. with a lid or a fire blanket.• CAUTION: The cooking
• Do not install the appliance adjacent to a dooror under a window. This prevents hot cookwarefalling from the appliance when the door or thewindow is
• Do not let the appliance stay unattended duringoperation.• Set the cooking zone to “off” after each use.• Do not put cutlery or saucepan lids on the
INSTALLATIONWARNING! Refer to Safety chapters.BEFORE THE INSTALLATIONBefore you install the hob, write down theinformation bellow from the rating plat
Make sure that the main connection pipe does notexert any strain on the hob.If you use flexible metal pipes make sure that theyagree to ISO 10380 and
• or E — Earth terminalBefore carrying out the connection, make sure:1. The limiter valve and the electrical system cantake the appliance load (see t
ASSEMBLY1.2.3.min. 55 mmmin. 650 mm560 mmmin. 100 mm30 mm480 mmmin. 600 mm4.50 mm400 mmIf a furniture unit is installed at adistance of 400 mm above t
Comments to this Manuals