Zanussi ZGG67412WA User Manual

ENUser manualHobZGG67412GB

than 20 m³), but not in a bathroom or showerroom.The minimum distance combustible material canbe fitted above the hob in line with the edges ofthe hob

4. With a thin screwdriver, adjust the by-passscrew position.AA) The by-pass screw• If you change from natural gas G20 20 mbarto liquid gas, fully tig

Green and yellow - EarthBlue - NeutralBrown - LiveReplacement of the connection cable1. Connect the green and yellow (earth) wireto the terminal which

Kitchen unit with ovenThe hob recess dimensions must obey the indi-cation and the kitchen unit must be equippedwith vents to let a continuous supply o

BURNER NORMAL POWER kW inj. 1/100 mmSemi-rapid 2.0 96Rapid 3.0 119Gas burners for LPG G30/G31 28-30/37 mbarBURNERNORMALPOWERkWinj.1/100 mmG3028–30 mba

15www.zanussi.com

www.zanussi.com/shop 397305504-A-122013

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Product description _ _ _ _ _ _ _ _ _ _ _

• Unattended cooking on a hob with fat or oil can be dangerous andmay result in fire.• Never try to extinguish a fire with water, but switch off the a

• Use only correct isolation devices: line pro-tecting cut-outs, fuses (screw type fuses re-moved from the holder), earth leakage tripsand contactors.

• Make sure pots are centrally positioned onthe rings and do not stick out over edges ofthe cooking surface.• Use only the accessories supplied with t

Ignition of the burnerWarning! Be very careful when you useopen fire in kitchen environment.Manufacturer decline any responsibility in casemisuse of t

Warning! Use cookware with diametersapplicable to the size of burners.Burner Diameters of cookwareRapid 180 - 260 mmRear left semi-rapid120 - 220 mmRe

• Be very careful when you replace thepan supports to prevent the hob topfrom damage.After cleaning, dry the appliance with a softcloth.Removing the d

Labels supplied with the accessories bagStick the adhesive labels as indicated below:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMODELMODELMOD.PROD.NO