Zanussi ZGG96624 User Manual download pdf (Page 18)

Control knobs

Symbol Description

no gas supply / off posi-

tion

Symbol Description

ignition position / maxi-

mum gas supply

minimum gas supply

Operating instructions

Ignition of the burner

Warning! Be very careful when you use open fire in

kitchen environment. Manufacturer decline any

responsibility in case misuse of the flame

Always light the burner before you put cookware.

To light the burner:

1. Turn the control knob counterclockwise to the maxi-

mum position (

) and push it down.

2. Keep the control knob pushed for approximately 5

seconds; this will let thermocouple to warm up. If

not, the gas supply will be interrupted.

3. Adjust the flame after it is regular.

If after some tries the burner does not light, check if

the crown and its cap are in correct positions.

Burner cap

Burner crown

Ignition candle

Thermocouple

Warning! Do not keep the control knob pushed for

more than 15 seconds.

If the burner does not light after 15 seconds, release the

control knob, turn it into off position and try to light the

burner again after minimum 1 minute.

Important! In the absence of electricity you can ignite the

burner without electrical device; in this case approach the

burner with a flame, push the relevant knob down and turn

it counter-clockwise to maximum gas release position.

www.zanussi.com

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

No comments

Zanussi ZGG96624 User Manual Page 18