Zanussi ZGG96624XA User Manual download pdf (Page 9)

3. After you clean the pan supports, make sure

that they are in correct positions.

4. For the burner to operate correctly, make

sure that the arms of the pan supports are

aligned with the centre of the burner.

Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar. If not,

the dirt can cause damage to the hob. Take

care to avoid burns.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat stains,

shiny metallic discoloration. Clean the hob

with a moist cloth and non-abrasive

detergent. After cleaning, wipe the hob dry

with a soft cloth.

• To clean the enamelled parts, cap and

crown, wash them with warm soapy water

and dry them carefully before you put them

back on.

Cleaning the spark plug

This feature is obtained through a ceramic

ignition candle with a metal electrode. Keep

these components well clean to prevent difficult

lighting and check that the burner crown holes

are not obstructed.

Periodic maintenance

Speak to your local Authorised Service Centre

periodically to check the conditions of the gas

supply pipe and the pressure adjuster, if fitted.

Troubleshooting

WARNING!

Refer to Safety chapters.

What to do if...

Problem Possible cause Remedy

There is no spark when you try to

activate the spark generator.

The hob is not connected to an

electrical supply or it is connec-

ted incorrectly.

Check if the hob is correctly con-

nected to the electrical supply.

The fuse is blown. Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

Burner cap and crown are placed

incorrectly.

Place the burner cap and crown

correctly.

The flame extinguishes immedi-

ately after ignition.

Thermocouple is not heated up

sufficiently.

After lightning the flame, keep the

knob pushed for equal or less

than 10 seconds.

The flame ring is uneven. Burner crown is blocked with

food residues.

Make sure that the injector is not

blocked and the burner crown is

clean.

www.zanussi.com 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments