Zanussi ZGS782ICTX User Manual download pdf (Page 8)

water rings, fat stains, shiny metallic dis-

colorations. Use a special cleaner appli-

cable for surface of hob.

2. Clean the appliance with a damp cloth and

some detergent.

3. At the end rub the appliance dry with a

clean cloth.

The stainless steel can become tarnished if it is

too much heated. Refer to this you must not

cook with potstones, earthenware pans or cast

iron plates.

Cleaning of the spark plug

This feature is obtained through a ceramic igni-

tion candle with a metal electrode. Keep these

components well clean to prevent difficult light-

ing and check that the burner crown holes are

not obstructed.

Periodic maintenance

Periodically speak your local Service Force

Centre to check the conditions of the gas sup-

ply pipe and the pressure adjuster, if fitted.

Troubleshooting

Problem Possible cause Remedy

There is no spark when lighting

the gas

• There is no electrical supply • Make sure that the unit is con-

nected and the electrical supply

is switched on.

• Control the fuse. If the fuse is

released more than one time,

refer to a qualified electrician.

• Burner cap and crown are

placed uneven

• Make sure that the burner cap

and crown are in correct posi-

tions.

The flame is blow out immediately

after ignition

• Thermocouple is not heated

sufficient

• After lightning the flame, keep

the knob pushed for approxi-

mately 5 seconds.

The gas ring burns unevenly • Burner crown is blocked with

food residues

• Make sure that the injector is

not blocked and the burner

crown is clear of food particles.

www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Zanussi ZGS782ICTX User Manual Page 8

Comments to this Manuals

Related products and manuals for Hobs Zanussi ZGS782ICTX