Zanussi ZBF 569 User Manual download pdf (Page 17)

Cleaning the oven door

The following instructions are relevant to the oven door

as it is supplied by the Manufacturer.

If the oven door has been reversed, please

note that the references to the right and left

side have to be switched.

Figure 1. With the right hand, hold the aluminium slotted

bar (“A”) while pulling off the inner glass support “B”

with the left hand. Push the support towards the right

to release it and then lift it up.

Figure 2. Remove the aluminium slotted bar “A” from

support “C”.

Figure 3. Hold firmly the inner glass “D” with the left

hand and pull the support “C” off from its original

position.

Make sure that glass “D” is firmly held to prevent

it from falling down.

Figure 4. Hold tighly the inner glass “D” with both hands

and remove it from its original position by sliding it

up.

After removing the inner glass, clean the oven door and

the glasses.

We recommend to clean the oven door using only a wet

sponge and dry it up after cleaning with a soft cloth.

Never use steel wool, acids or abrasive products as

they can damage the oven surface.

After cleaning, place the inner glass “D” back in its

original position.

To correctly mount the inner glass “D” (with stripes

along the sides) the surface marked with stripes

has to face the oven door in a way that, when

touching the surface on sight, the light roughness

of the silk-screen printing is not perceptible.

After placing the inner glass back, insert support “C” in

its position and, then:

Figure 1

Figure 2

Figure 3

Figure 4

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

No comments

Zanussi ZBF 569 User Manual Page 17