Zanussi ZM266ST Service Manual download pdf (Page 4)

SOI 05.06 FV 4/34 599 36 78-44

CAUTION

MICROWAVE RADIATION

Personnel should not be exposed to the microwave energy which may radiate from the

magnetron or other microwave generating devices if it is improperly used or connected. All input

and output microwave connections, waveguides, flanges and gaskets must be secured. Never

operate the device without a microwave energy absorbing load attached.

Never look into an open waveguide or antenna while the device is energized.

GENERAL IMPORTANT INFORMATIONS

This Manual has been prepared to provide Service Engineers with Operation and Service Information.

It is recommended that service engineers carefully study the entire text of this manual, so they will be

qualified to render satisfactory customer service.

WARNING

Note: The parts marked "*" are used at voltage

more than 250V. (Schematic Diagrams).

WARNING

Never operate the oven until the following points are ensured.

(A) The door is tightly closed.

(B) The door and oven hinges are not defective.

(D) The door is not deformed or warped.

(E) There is not any other visible damage with the oven.

Servicing and repair work must be carried out only by trained

Service Engineers.

All the parts marked ”*” on schematic diagrams are used at

voltages more than 250V.

Removal of the outer wrap gives access to potentials above

250V.

If the Magnetron are damaged may cause undue microwave

exposure.

1 2 3 4 5 6 7 8 9 ... 33 34

No comments

Zanussi ZM266ST Service Manual Page 4