Zanussi ZOB 550 User Manual download pdf (Page 25)

Telescopic Shelf Supports and

Catalytic Panels

The shelf supports and the catalytic panels can

be removed for easy cleaning.

Make sure the appliance is

completely cooled before carrying out

this operation.

The side rails with telescopic pull-out runners can be

completely removed for cleaning.

Proceed as follows:

1) remove the front screw while keeping the shelf

support and the catalytic panel in position with

the other hand (see diagram 1);

2) keep the shelf support and the catalytic panel

in position and lift them with a hand while

disengaging the rear hook. Take off the shelf

support and the catalytic panel (see diagram

2);

Clean the telescopic shelf supports on the

outside only with commercially available

detergents.

Important: The telescopic shelf supports must

not be cleaned in the dishwasher.

Attention: the rollers must not be greased.

3) once the cleaning is carried out, fit the shelf

support and the catalytic panel together and

mount them following the procedure in reverse.

Please, ensure the retaining nuts are secure when

refitting the shelf support and the catalytic panel.

It is possible to remove the telescopic runners

only, unlocking the elements as shown on

page 16.

The telescopic runners must not be cleaned

in the dishwasher.

)

Do not attempt to remove the

telescopic runners until the oven has

cooled down.

Do not competely pull out the

telescopic runners to remove them

from the side rails.

Sharp edges could cause injuries.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

No comments

Zanussi ZOB 550 User Manual Page 25