Zanussi U33008 User Manual download pdf (Page 26)

For Europe use only

Min. size Cable/ Cable / flex type Fuse

flex

2.5 mm

H07 RN-F, H05 RN-F,

15 A

H05 RR-F, H05 VV-F,

H05 V2V2-F (T90),

H05 BB-F

Electrical Connection

The oven is designed to be connected to 230 V (50 Hz)

electricity supply.

The oven has an easily accessible terminal block

which is marked as follows:

Letter L - Live terminal

Letter N- Neutral terminal

or E - Earth terminal

THIS OVEN MUST BE EARTHED

The cable used to connect the oven to the electrical

supply must comply to the specifications given

below.

It is necessary that you install a double pole switch

between the oven and the electricity supply (mains),

with a minimum gap of 3mm between the switch

contacts and of a type suitable for the required load

in compliance with the current rules.

The switch must not break the yellow and green

earth cable at any point.

the yellow and green earth cable should be 2-3 cm

longer than the other cables.

Important

After installation and connecting, the cable must be

placed so that it cannot at any point reach a

temperature of more than 60°C above the ambient

temperature.

Before the oven is connected, check that the main

fuse and the domestic installation can support the

load and that the power supply is properly earthed.

The manufacturer declines any responsibility

should these safety measures not be carried

out.

Connection Min. size Cable / flex Fuse

via Cable/flex type

13 A socket 2.5 mm

3 core 13 A min.

outlet butyl

13 A spur box

insulated

Oven 2.5 mm

PVC/PVC

15 A min.

Control twin and

Circuit earth

20 A max.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Zanussi U33008 User Manual Page 26

Comments to this Manuals

Related products and manuals for Sandwich makers Zanussi U33008