Zanussi FJE 1005 Operations Instructions download pdf (Page 11)

ENGLISH

• Draining and spin:

- Press the START/PAUSE button. The machine

will drain the water, then spin the laundry at the

maximum speed provided for the selected

programme.

- Select spin speed by means of button 5, and

press the START/PAUSE button.

• Drain only

- Press the SKIP/RESET button (9) once, so as to

cause the DRAIN light to light up, then press

the START/PAUSE button.

Important! If you accidentally press the

SKIP/RESET button more than once, the memory

will be cleared. To drain the water, select any

washing programme by means of the FABRIC

button, then press SKIP/RESET three times in

order to select the DRAIN position (only the

DRAIN light will remain lit).

6-7 OPTIONS buttons

Press these buttons to select the following options:

• PREWASH : select this option if you wish your

laundry to be prewashed before the main wash

(not available for wool and hand-wash cycle).

The prewash ends with a short spin in programmes

for cotton and synthetic fabrics, whereas in the

programme for delicate fabrics the water is only

drained.

• SUPER RINSE : this option can be selected

with all programmes except the wool programme

and hand wash. The machine performs 4 rinses

instead of 3. This option is recommended for

people who are allergic to detergents, and in areas

where the water is very soft.

• QUICK WASH : for laundry that is only slightly

soiled (not for wool and HAND WASH

programme).

The washing time will be reduced according to the

type of fabric and the selected temperature.

8 START/PAUSE button

This button has three functions:

• Start: after you have selected the desired

programme and options, press this button to start

the washing machine. The light above the button

will stop flashing and remain lit.

• Pause: when you press this button again, the

programme in progress is interrupted. The light

above the button will start flashing. To restart the

programme, press the button again.

When you PAUSE the cycle, the DOOR LOCKED

light goes out, and it becomes possible to open the

door, provided

• the washing machine is not in the heating phase;

• the level of the water is not high;

• the drum is not turning.

Important! You must set the washing machine to

PAUSE before you make any change in the

programme in progress.

• Draining of water and spinning after the

execution of programmes with the RINSE HOLD

option.

9 SKIP/RESET button

At the end of a programme, you must press this

button once or repeatedly, in order to clear the

contents of the memory (all the lights must be off);

otherwise, the next time you switch the washing

machine on, the audible warning signals relevant to

the end of the previous cycle will be given.

You can also press the RESET button to exclude

one or several phases of the programme which is

running, as indicated below.

- set the washing machine to PAUSE by pressing the

START/PAUSE button (the relevant light will flash);

- press the RESET button once or several times, until

the required phase(s) is(are) cancelled (the light next

to the name of the phase(s) will go out).

Example:

In this case, the spin (at

the speed provided for

the selected type of

fabric) will be

performed.

132999480•gb 4-10-2000 14:32 Pagina 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 90 91

Comments to this Manuals

No comments

Zanussi FJE 1005 Operations Instructions Page 11

Comments to this Manuals

Related products and manuals for Washing machines Zanussi FJE 1005