Zanussi FJS974N User Manual download pdf (Page 7)

Transit devices

All transit bolts and packing must be removed

before using the appliance.

You are advised to keep all transit devices so that

they can be refitted if the machine ever has to be

transported again.

1. Using a spanner, unscrew and remove the rear

right-hand bolt.

2. Lay the machine on its back, taking care not to

squash the hoses. This can be avoided by placing

one of the corner packing pieces between the

machine and the floor.

3. Remove the polystyrene block from the underside

of the machine.

4. Release the two plastic bags by removing the

adhesive strip.

Carefully remove the right-hand bag (1) then the

left-hand bag (2) by pulling them towards the

centre of the machine.

5. Set the machine upright and remove the two

remaining bolts from the back.

6. Pull out the three plastic pegs from the holes into

which the bolts were fitted.

7. Plug the open holes with the plugs which you will

find on the back of the machine.

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is

not impeded by carpets, rugs etc. Check that the

machine does not touch the wall or other kitchen

units.

Carefully level by screwing the adjustable feet in or

out. Never place cardboard, wood or similar materials

under the machine to compensate for any unevenness

in the floor.

ENGLISH

Installation

P0255

P0234

P0233

P0256

P0020

P1051

124972380 FJS 974 N gb 28-06-1999 10:09 Pagina 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 20 21

Comments to this Manuals

No comments

Zanussi FJS974N User Manual Page 7

Comments to this Manuals

Related products and manuals for Washing machines Zanussi FJS974N