Zanussi ZWG3104 User Manual download pdf (Page 12)

9. Programme selector dial

The selector dial can be turned either clockwise or

counter-clockwise.

Use this selector dial to select the required

programme.

At the end of each programme the selector dial

must be turned to position “

O”, to switch off the

machine.

ATTENTION!

If the programme selector dial is turned to another

position (programme) when the machine is working,

the lights of the programme progress display start to

flash. The machine will not perform the new selected

programme, but it will continue running on the same

cycle.

REMEMBER!

In the event a wrong programme has been selected

and the machine is already working, proceed as

follows:

1. Turn the programme selector dial to position “

O”.

2. Select the new required programme.

• If the machine has not already gone through the

rinse cycle, when you decide to change the running

programme, in the new programme the water and

the detergent from the previous cycle will be re-

used, making it an energy-saving tool. On the

other hand, if it is already in the rinse phase;

detergent, bleach,… must be re-measured.

3. Press INICIO / PAUSA button, to start the new

cycle.

35.292.991…ZWG3104.qxd 18/12/06 18:43 Página 36

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

No comments

Zanussi ZWG3104 User Manual Page 12