Zanussi ZWH6140P User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
Cancelling the delayed start after having started the
programme:
set the appliance to PAUSE by pressing the button 6;
press the button 5 once, the light relevant to the selected
delay goes off;
press the button 6 again to start the programme.
The DELAY START cannot be selected with the drain pro-
gramme.
Important! The selected delay can be changed only after se-
lecting the washing programme again. The door will be locked
throughout the delay time. If you need to open the door, you
must set the appliance to PAUSE (by pressing the button 6)
and then wait a few minutes. After you have closed the door,
press the button 6 again.
6
Start/Pause
Start /Pause
Start the programme by pressing the button 6
To start the selected programme, press the button 6, the
corresponding green pilot light stops flashing. The pilot light
7.1 illuminates to indicate that the appliance starts operat-
ing and the door is locked. If you have chosen a delayed
start, the appliance will begin the countdown.
To interrupt a programme which is running, press the but-
ton 6: the corresponding green pilot light starts flashing. It
is possible to change some options of a running pro-
gramme before the programme carries them out.
To restart the programme from the point at which it was in-
terrupted, press the button 6.
After the programme has started the door is locked. If, for
any reason, you need to open the door, set firstly the ap-
pliance to PAUSE by pressing the button 6. After a few mi-
nutes it will be possible to open the door.
If the door remains locked, this means that the appliance is
already heating or that the water level is too high. In any
case, do not try to force the door!
If you cannot open the door but you need to open it you
have to switch the appliance off by turning the selector dial
to
. After a few minutes the door can be opened (pay
attention to the water level and temperature!). After
closing the door, it is necessary to select the programme
and options again and to press the button 6.
17
www.zanussi.com
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Comments to this Manuals

No comments