Zanussi ZWH6140P User Manual download pdf (Page 9)

Positioning and levelling

x 4

Level the appliance by raising or lowering the

feet.

The appliance MUST be level and stable on a

flat hard floor. If necessary, check the setting

with a spirit level. Any necessary adjustment

can be made with a spanner.

Accurate levelling prevents vibration, noise

and displacement of the appliance during op-

eration.

Repeat the levelling action, if the appliance is

not level and stable.

Warning! This appliance is free standing

only. Do not remove the worktop for any

reason.

Water inlet

Connect the hose to

a tap with a 3/4”

thread.

35°

45°

Loosen the ring nut to angle the hose to the

left or right depending on the position of your

water tap. Do not place the inlet hose

downwards. After positioning the inlet hose,

be sure to tighten the ring nut again to pre-

vent leaks.

Water drainage

Firstly form a hook in the end of the drain

hose using the plastic hose guide supplied

with the appliance .

The end of the drain hose can be positioned

in four ways:

• Hooked over the edge of a sink using

the plastic hose guide.

9

www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comments to this Manuals

No comments