Zanussi ZWH6140P User Manual download pdf (Page 9)

Push the drain hose onto the spigot and secure with a

clip, ensure a loop is formed in the drain hose to pre-

vent waste from the sink entering the appliance.

If the outlet spigot has not been used before, remove

any blanking plug that may be in place.

• Directly into a drain pipe at a height of not less than

60 cm and not more than 100 cm.

MAX 100cm

The end of the drain hose

must always be ventilated,

i.e. the inside diameter of

the drain pipe must be

larger than the outside di-

ameter of the drain hose.

The drain hose must not

be kinked.

If your drain hose looks

like this (see beside) you

do not require the “U”

piece”. Just push the hose

firmly in to the standpipe.

• Directly to a built-in drain pipe in the room wall.

The drain hose may be extended to a maximum of 4

metres. An additional drain hose and joining piece

is available from your Local Centre.

Connections overview

115 cm 140 cm

mc150mc100

max 100 cm

min. 60 cm

max 100 cm

min. 60 cm

mc9 0 mc115

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

No comments

Zanussi ZWH6140P User Manual Page 9