Zanussi ZWI71401WA User Manual

GETTING STARTED?EASY.User ManualZWI 71201 WAZWI 71401 WAEN User ManualWashing Machine

To limit vibration we recommend placing awaterproof wooden panel, at least 15 mm thick,under the appliance. It should be screwed to atleast 2 floor be

• You set a option that is not suitable for theprogramme.• You change the programme while it operates.PROGRAMMESPROGRAMME CHART ProgrammeTemperature r

ProgrammeTemperature rangeMaximum loadReference spinspeedProgramme description(Type of load and soil level)9Delicates 30°C3 kg700 rpmDelicate fabrics

ProgrammeTemperature rangeMaximum loadReference spinspeedProgramme description(Type of load and soil level)20Spin 7 kg1200 rpm(ZWI 71201WA)1400 rpm(Z

ProgrammeSpinRinse HoldEco1)Quick Wash2)Prewash3)Easy Iron4)Extra RinseDelay StartMix 20° Soak Mini 30'

Programmes Load (kg)Energy con-sumption(kWh)Water con-sumption (litre)Approximateprogramme du-ration (mi-nutes)Remainingmoisture (%)1)Delicates30°C3 0

The related indicator comes on.QUICK WASH Press this button to decrease the programmeduration.Set this option for items with light soil or items toref

DAILY USEWARNING! Refer to Safety chapters.LOADING THE LAUNDRYOpen the water tap. Connect the mains plug to themains socket.1. Pull the door handle to

• The programme time decreases with stepsof one minute.The drain pump can operate for ashort time at the beginning of thewashing cycle.CANCELLING A RU

• Some coloured items can discolour with the firstwash. We recommend that you wash themseparately for the first times.• Button up pillowcases, close z

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for

CAUTION! Do not use alcohol,solvents or chemical products.DESCALINGIf the water hardness in your area is high ormoderate, we recommend that you use a

• When no more watercomes out, unscrewthe filter.• Turn the filter anti-clockwise.12• Remove the filter.• Use pliers, if necessa-ry.• When removing th

2. Close the water tap.3. Place the end of the emergency emptying hoseand that of the inlet hose in a bowl placed onthe floor and let water flow out o

POSSIBLE FAILURESProblem Possible solutionThe programme does notstart.• Make sure that the mains plug is connected to the mains socket.• Make sure tha

After the check, activate the appliance. Theprogramme continues from the point of interruption.If the problem occurs again, contact the AuthorisedServ

Energy consumption of the standard 60°C cotton programme at par-tial load in kWh0.79Energy consumption of the standard 40°C cotton programme at par-ti

Energy consumption of the standard 60°C cotton programme at fullload in kWh1.01Energy consumption of the standard 60°C cotton programme at par-tial lo

27

WWW.ZANUSSI.COM/SHOP132908193-A-452018

– areas for communal use in blocks of flats or in launderettes.• Do not exceed the maximum load of 7 kg (refer to the"Programme chart" chapt

ELECTRICAL CONNECTIONWARNING! Risk of fire and electricshock.• The appliance must be earthed.• Always use a correctly installed shockproofsocket.• Mak

• After removing all thepackaging, carefullylay the appliance onit’s back to removethe polystyrene basefrom the bottom.• Remove the powersupply cable

• Connect the hose to atap with a 3/4”thread.Always use the hosesupplied with the ap-pliance.• The inlet hose must not be lengthened. If it istoo shor

600 mm555 mm596 mm170 mm75 mm100 mm60 mmmin.830 mmmin.560 mm818 mmWe recommend that you keep thepackaging and the transit bolts for anymovement of the

Ø 35 mm14 mm16-22 mm22±1,5 mm416mmX595-598 mmHingesTo mount the hinges drill two holes (dia. 35 mm,depth 12.5-14 mm depending on the depth of doorfurn

ABCEDPRODUCT DESCRIPTIONAPPLIANCE OVERVIEW1234561Detergent dispenser2Control panel3Door handle4Rating plate5Drain pump filter6Feet for levelling the a