ENUser manualFridge-FreezerZBB28440SA
PositioningInstall this appliance at a location where the ambient tem-perature corresponds to the climate class indicated on therating plate of the ap
• Loosen the upper pinand remove the spacer.• Remove the upper pinand the upper door.• Loosen the middlehinge.• Remove the lower door.• Loosen the low
44mm4mm3 Adjust the appliance inthe niche.Make sure that the dis-tance between the appli-ance and the cupboardfront-edge is 44 mm.The lower hinge cove
HbHa8 mm11 Open the appliancedoor and the kitchen furni-ture door at an angle of90°.Insert the small square(Hb) into guide (Ha).Put together the appli
14
www.zanussi.com/shop 222301066-A-452011
ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Helpful hints and tips _ _ _
3. Make sure that you can come to the mains plug ofthe appliance.4. Do not pull the mains cable.5. If the power plug socket is loose, do not insert th
Switching onInsert the plug into the wall socket.Turn the Temperature regulator clockwise to a mediumsetting.Switching offTo turn off the appliance, t
Important! Do not use metallic instruments to remove thetrays from the freezer.Cold accumulatorsThe freezer contains at least one cold accumulator whi
• lean foods store better and longer than fatty ones; saltreduces the storage life of food;• water ices, if consumed immediately after removal fromthe
2. Remove any stored food, wrap it in several layers ofnewspaper and put it in a cool place.Caution! Do not touch frozen goods with wet hands.Hands ca
Problem Possible cause Solution The door has been opened too fre-quently.Do not keep the door open longer thannecessary. The product temperature is
Remove the screw fromthe lamp cover.Remove the lamp cover(refer to the illustration).Replace the used lampwith a new lamp of thesame power and specifi
Comments to this Manuals