Zanussi ZRT623W User Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
1. Remove the plug from
the power socket.
2. Open the door of the
freezer. Loosen the hinge.
1
2
3
3. Remove the doors by
pulling them slightly and
remove the hinge.
4. On the opposite side, re-
move the hole covers.
5. Unscrew both adjustable
feet and the screws of the
bottom door hinge. Remove
the bottom door hinge and
install it on the opposite
side.
6. Unscrew the bottom far
side screw and install on
the opposite side.
7. Unscrew the top door
holding pin.
8. Screw the pin back on
the other side.
3
2
1
9. Fit the doors into the
pins and install the doors.
Install the hinge.
10. On the opposite site,
install the hole covers.
11. Tighten the hinge.
Make sure that the doors
are aligned.
12. Remove and install the
handle
1)
13. Reposition, level the
appliance, wait for at least
four hours and then con-
nect it to the power socket.
1) If foreseen
Do a final check to make sure that:
All screws are tightened.
The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the gas-
ket may not fit perfectly to the cabinet. In that case, wait
for the natural fitting of the gasket.
In case you do not want to carry out the above mentioned
operations, contact the nearest After Sales Service Force.
The After Sales Service specialist will carry out the rever-
sibility of the doors at your cost.
23
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 51 52

Comments to this Manuals

No comments