Zanussi ZHC960 Owner's Manual download pdf (Page 13)

INSTALLING THE COOKER HOOD

Fitting the Wall Brackets

• Draw a vertical line on the wall, from the

centre of the cooking appliance up to the

ceiling, or as high as is practical using a

spirit level and marker pen. This is to

ensure the correct vertical alignment of

the product.

• Draw a horizontal line through the vertical

at 650mm above the hob.

• Place the first bracket item 7.2 against

the wall 1 or 2mm from the ceiling or the

upper limit as shown aligning the notch in

the centre with the vertical line and mark

the hole centres on the wall ready for

drilling.

• Place the second bracket item 7.2 against

the wall at X below the first bracket as

shown aligning the notch in the centre with

the vertical line and mark the hole centres

on the wall ready for drilling. (X is

determined by the height of the upper

chimney supplied).

• Draw a horizontal line through the vertical

at 323mm above the hob and mark two

hole centres at 116mm either side of the

vertical line.

• Drill the six holes for the fixing screws and

rawl plugs (not supplied).

• Fix the two wall brackets using the top four

screw holes as illustrated.

• Insert two screws into the holes 116mm

either side of the vertical and tighten the

screws leaving a space between the

underside of the screwhead and the wall

of 5-6mm.

Note: If the hood is to be installed onto a

hollow construction or plaster or partition

board wall then the special fixing screws

will be required (not supplied).

Fitting the Hood Body

• Before starting to fix the hood body,

tighten the two screws item Vr located on

the top of the hood body.

• Hook the hood body on to the screws

116mm either side of the vertical line and

fully tighten the screws 12a (not supplied).

• Using a screw driver and spirit level,

adjust the screws item Vr until the hood

body is level.

Page 13

11

12a

323

X

116

1÷2

116

650 min.

7.2.1

12a

Vr

1 2 ... 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments