Zanussi ZDI121W User Manual

User manualDishwasherZDI 121

Unscrew the cap.Only before filling withsalt for the first time, fillthe salt container with wa-ter.Using the funnel provided,pour in the salt until t

Filling with rinse aidOpen the lid.Fill up with rinse aid. Themaximum level for filling isindicated by "max"Clean up any rinse aidwhich over

Open the lid.Set the dosage level. (Thedose is factory set in po-sition 4).Close the lid and press un-til it locks.Loading cutlery and dishesSponges,

For washing in the dishwasher the following cutlery and dishesare not suitable: are of limited suitability:• Cutlery with wooden, horn, china or mothe

Load upper basket. Lightitems (plastic bowls etc.)must be loaded in the up-per basket and arrangedso they do not move.For taller items, the cupracks c

Use of detergentIMPORTANT!Only use detergents suitable for dishwashers.Observe the manufacturer’s dosing and stor-age recommendations.Open the lid.Fil

Care and cleaningCleaning the filtersIMPORTANT!NEVER use the dishwasher without filters. In-correct repositioning and fitting of the filters willprodu

use abrasive products, scouring pads or sol-vent (acetone, trichloroethylene etc...).Internal cleaningEnsure that the seals around the door, the de-t

product. For more detailed information aboutrecycling of this product, please contact yourlocal council, your household waste disposalservice or the s

Fault code and malfunction Possible cause and solution• The programme does not start • The dishwasher’s door has not been properlyclosedClose the door

Thank you for selecting ourapplianceWe wish you lots of enjoyment with your newappliance and we hope that you will considerour brand again when purcha

The wash results are not satisfactoryThe dishes are not clean • The wrong washing programme has been selected.• The dishes are arranged in such a way

Noise level dB(A) 49Consumption valuesThe consumption values are intended as aguide and depends on the pressure and thetemperature of the water and al

Upper basketCutlery basket Lower basketcup racks: position AInstallation WARNING!Any electrical and/or plumbing work required toinstall this applianc

If the water inlet hose leaks, the safety valvecuts off the water supply. WARNING!The electrical cable for the safety valve is in thedouble-walled wa

Electrical connection CAUTION!Safety standards require the appliance to beearthed.Prior to using the appliance for the first time,ensure that the rat

25

26

27

www.electrolux.com156993440-00-26072007Subject to change without notice

Safety informationIn the interest of your safety and to ensure thecorrect use, before installing and first using theappliance, read this user manual c

Installation• Check your dishwasher for any transportdamage. Never connect a damaged ma-chine. If your dishwasher is damaged con-tact your supplier.•

Programme selector dial and On/Off switch• when in this position, the machine is switched off(corresponding light off),• when the marker on the dial c

Indicator lightsWash indicator lightIlluminates when the washing and rinsing phases arerunning.Dry indicator lightIlluminates when the drying phase i

Programme Degree of soil Type of load Programme descriptionBIO 50° 2)Normal soil Crockery and cutlery PrewashMain wash1 intermediate rinseFinal rinseD

If you decide in future to use separated deter-gents, we advise that you:– Fill up the salt and rinse aid container.– Adjust the water hardness settin

Setting the water softener manually (see table)Set switch to position 1 or2The water softener is factory set at position 2.Setting the water softener