Zanussi ZDS200 User Manual download pdf (Page 17)

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions

given here, without calling out an engineer.

What to do, when...

...a flashing fault code appears

The dishwasher will not start or stops during operation.

The intervention of an alarm is indicated by:

- continuous flashing of the start/cancel indicator light,

- a combination of flashing and pauses of the end of programme indicator light (as described in the chart).

Open the door and carry out the following suggested corrective actions.

Once these checks have been carried out; close the door and press the start/cancel button. The programme will continue from the

point at which it was interrupted. If the fault code reappears contact the Service Force Centre.

For other combinations of fault codes not described in the above chart, please contact your Service Force Centre.

- continuous flashing of the

"Start/cancel" indicator light

- 1 flash of the "end of

programme" indicator light

The machine does not fill with

water.

- continuous flashing of the

"Start/cancel" indicator light

- 2 flashes of the "end of

programme" indicator light

The dishwasher will not drain.

Fault code / malfunction Possible cause Solutions

The water tap is blocked or furred with

limescale.

The water tap is turned off.

The filter (where present) in the threaded hose

fitting at the water inlet valve is blocked.

The water inlet hose has not been correctly laid

or it is bent or squashed.

Clean the water tap.

Turn the water tap on.

Clean the filter in the threaded hose

fitting.

Check the water inlet hose connection.

The sink spigot is blocked. Clean out the sink spigot.

The water drain hose has not been correctly laid

or it is bent or squashed.

Check the water drain hose connection.

...there are problems when operating the dishwasher

The programme does not start

There is a whistling noise during

washing

Malfunction Possible cause Solutions

The dishwasher door has not been properly

closed.

The main plug is not plugged in.

The fuse has blown in the household fuse box.

For dishwasher models with delay start

option:

Delay start has been selected.

Close the door.

Insert the mains plug.

Replace the fuse.

If dishes are to be washed immediately,

cancel the delay start.

Use a different brand of detergent.The whistling is not a cause for concern.

1 2 ... 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Zanussi ZDS200 User Manual Page 17

Comments to this Manuals

Related products and manuals for Dishwashers Zanussi ZDS200