Zanussi ZDT22003FA User Manual

GETTING STARTED?EASY.User ManualZDT22003FAEN User ManualDishwasher

ADDING MULTI-TABLETS212030• Do not fill the salt container and the rinse aid dispenser.• Set the rinse aid dispenser to the lowest position.SETTING AN

HINTS AND TIPSGENERALThe following hints will ensure optimal cleaning anddrying results in daily use and also help to protectthe environment.• Remove

UNLOADING THE BASKETS1. Let the tableware cool down before youremove it from the appliance. Hot items can beeasily damaged.2. First remove items from

Follow carefully the instructions on thepackaging of the product.TROUBLESHOOTINGIf the appliance does not start or it stops duringoperation, before yo

Problem and alarm code Possible cause and solutionThe program lasts too long. • If the delayed start option is set, cancel the delaysetting or wait fo

Problem Possible cause and solutionThere are whitish streaks or blu-ish layers on glasses and dishes.• The release quantity of rinse aid is too much.

Refer to "Before first use", "Dailyuse" or "Hints and tips" for otherpossible causes.TECHNICAL INFORMATIONDimensions Wid

17

18

19

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for

WWW.ZANUSSI.COM/SHOP156918590-A-212017

• Put the cutlery in the cutlery basket with the sharp endspointing down or put them in the cutlery drawer in a horizontalposition with the sharp edge

• Do not drink and play with the water in theappliance.• Do not remove the dishes from the applianceuntil the programme is complete. Somedetergent may

CONTROL PANEL453211On/off button2Programme indicators3Indicators4Programme button5Delay buttonINDICATORSEnd indicator.Salt indicator. It is always off

ProgrammeDegree of soilType of loadProgramme phasesConsumption values1)Duration(min)Energy(kWh)Water(l)3)Fresh soilCrockery andcutlery• Wash 60 °Cor 6

• The activation or the deactivation of the acoustic signal for the end of programme.• The activation or the deactivation of AirDry.As the appliance s

ACTIVATING AIRDRYAirDry improves the drying results with less energy consumption.By default, AirDry is activated with all programmes excluding (if a

ADDING SALTBefore the first use, put one litre of water in the salt container.CAUTION! Water and salt can come out of the salt container during fillin