Zanussi ZU9144 User Manual download pdf (Page 8)

1. Remove the plinth (1), then the ventilation grid (2);

2. Carefully pull the air deflector out (3), checking that

there is no water left from the defrosting.

Periodic cleaning

Never use metal objects for cleaning your appliance

as it may get damaged. Clean the inside with warm

water and bicarbonate of soda. Rinse and dry

thoroughly.

The appliance is equipped with an air inlet filter (1)

and an air outlet duct (2) on the ventilation grid. Keep

clean to guarantee good ventilation and good working

order of the appliance.

The filter can be removed and washed with water, as

follows:

1. Pinch flaps (a) and (b) with fingers

2. Pull the filter down.

3. Pull the filter out.

To replace the filter reverse the process.

An accumulation of dust will affect the performance of

the appliance and cause excessive electricity

consumption.

The structure of the appliance permits cleaning of the

rear zone close to the wall, using a vacuum cleaner.

S.I.012

S.I.013

Periods of non-operation

When the appliance is not in use for long periods,

take the following precautions:

remove the plug from the wall socket;

remove all food:

defrost and clean the interior and all accessories;

leave the door ajar to allow air to circulate to prevent

unpleasant smells.

Interior light

The light bulb inside the refrigerator compartment can

be reached as follows:

1. unscrew the light cover securing screws;

2. unhook the moving part by pressing it as shown in

the figure.

If the door is open and the light does not come on,

check that the bulb is properly screwed in; if it still

does not work, replace the bulb with one of the same

power.

The maximum rating is shown on the light cover.

D411

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Zanussi ZU9144 User Manual Page 8

Comments to this Manuals

Related products and manuals for Fridge-freezers Zanussi ZU9144