Zanussi ZQA12430DA User Manual download pdf (Page 11)

Climate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Ventilation requirements

The airflow behind

the appliance must

be sufficient.

5 cm

min. 200cm

2

min.

200cm

2

Electrical Connection

Caution! Any electrical work required to

install this appliance should be carried out

by a qualified electrician or competent person.

Warning! This appliance must be earthed.

The manufacturer declines any liability

should these safety measures not be observed.

AB

C

D

E

Important! The wires in the mains lead are

coloured in accordance with the following

code:

A Green and Yellow: Earth

C Brown: Live

D Blue: Neutral

As the colours of the wires in the mains lead of

this appliance may not correspond with the col-

oured markings identifying the terminals in your

plug, proceed as follows:

1. Connect the wire coloured green and yel-

low to the terminal marked either with the

letter “E“ or by the earth symbol

or col-

oured green and yellow.

2. Connect the wire coloured blue to the ter-

minal either marked with the letter “N“ or

coloured black.

3. Connect the wire coloured brown to the

terminal either marked with the “L“ or col-

oured red.

4. Check that no cut, or stray strands of wire

is present and the cord clamp E is secure

over the outer sheath.

5. Make sure the electricity supply voltage is

the same as that indicated on the appli-

ance rating plate.

6. Switch on the appliance.

The appliance is supplied with a 13 amp plug

fitted B. In the event of having to change the

fuse in the plug supplied, a 13 amp ASTA ap-

proved (BS 1362) fuse must be used.

Warning! A cut off plug inserted into a 13

amp socket is a serious safety (shock)

hazard. Ensure that it is disposed of safely.

11

www.zanussi.com

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments