Zanussi ZCG61266XA User Manual

ENZCG61266User ManualCookerEG

CookwareWARNING!Do not put the same pan on twoburners.WARNING!Do not put unstable or damagedpots on the burner to prevent fromspill and injury.CAUTION

the pan supports by hand and dry them. Ifnecessary, remove stubborn stains with apaste cleaner.3. After you clean the pan supports, make surethat they

3. At the same time push the knob for theoven functions and turn it counterclockwiseto the maximum gas flow position.4. When the flame comes on, keep

Oven - Using the accessoriesWARNING!Refer to Safety chapters.Inserting the accessoriesWire shelf:Put the shelf on the correct shelf position. Makesure

6. Use the screws to tighten the forks.7. Put the tip of the spit into the turnspit hole.Refer to "Product description" chapter.8. Put the f

• Leave the meat for approximately 15 minutesbefore carving so that the juice does notseep out.• To prevent too much smoke in the ovenduring roasting,

Food Quantity(kg)Tem-pera-ture(°C)Time(min)Grill posi-tionGrillingtime(min)Totalprepara-tion time(min)Shelfposi-tionBeef 1.2 - 1.8 210 90 -120min. 90

Food Quantity(kg)Tem-pera-ture(°C)Time(min)Grill posi-tionGrillingtime(min)Totalprepara-tion time(min)Shelfposi-tionYeast cake1)1.0 - 1.5 195 45 - 50

Cleaning the oven doorThe oven door has two panels of glass installedone behind the other. To make the cleaningeasier remove the oven door.WARNING!The

The back lamp1. Turn the lamp glass cover counterclockwiseto remove it.2. Clean the glass cover.3. Replace the lamp with a suitable 300 °Cheat-resista

ContentsSafety information 2Safety instructions 4Product description 6Before first use 8Hob - Daily use 9Hob - Hints and tips9Hob - Care and cleaning1

Problem Possible cause RemedyIt takes too long to cook thedishes or they cook too quickly.The temperature is too low or toohigh.Adjust the temperature

Technical dataVoltage 220 - 240 VFrequency 50 / 60 HzAppliance class 1Dimension mmHeight 850 - 870Width 600Depth 600Other technical dataAppliance cate

BURNER NORMAL POWERkWREDUCED POWER kW INJECTOR MARK1/100 mmOven 2.25 1.0 71Grill 2.0 1.5 71Gas connectionThe gas pipe in the appliance has two endings

WARNING!Before you replace the injectors,make sure that the gas knobs are inthe Off position. Disconnect theappliance from the electrical supply.Let t

2. Carefully remove from the burner thethermocouple A. Next remove the sparkplug B.AB3. Unscrew the screw and slowly pull out theburner.124. Release t

3. With a thin and flat screwdriver adjust thebypass screw A.The model determines the position of thebypass screw A.AChanging from natural gas to liqu

3. Put the appliance on the sidewall on a cleanand smooth surface. Place each foot into aseparate hole, in the plinth, and rotate itclockwise.B4. If t

www.zanussi.com 27

www.zanussi.com/shop867330122-C-322017

• This appliance is not intended to be used on a ships, boats orvessels.• Do not install the appliance behind a decorative door in orderto avoid overh

• WARNING: Use only hob guards designed by themanufacturer of the cooking appliance or indicated by themanufacturer of the appliance in the instructio

appliance according to current installationregulations. Pay attention to requirementsregarding adequate ventilation.UseWARNING!Risk of injury and burn

• Fat and food remaining in the appliance cancause fire.• Clean regularly the appliance to prevent thedeterioration of the surface material.• Clean th

Model denomination and PNC numberZCG61266XA943006115Initial gas settingsNatural gas LPG XAdditional gas injectors XHob integrated ignition on the con

Cooking surface layout1 2 35 41Auxiliary burner2Steam outlet - number and position dependon the model3Semi-rapid burner4Semi-rapid burner5Rapid burner

Hob - Daily useWARNING!Refer to Safety chapters.Ignition of the hob burnerAlways light the burner before youput on the cookware.WARNING!Be very carefu