Zanussi ZCG91236XA User Manual

GETTING STARTED?EASY.User ManualZCG91236XAEN User ManualCookerEG

Be very careful when you replacethe pan supports to prevent thehob top from damage.2. After you clean the pan supports, make surethat they are in corr

settings and push it to light the burner.Release the spark generator button whenburner lights.Keep the knob for the oven functions pushedfor 15 second

OVEN - USING THE ACCESSORIESWARNING! Refer to Safety chapters.INSERTING THE ACCESSORIESWire shelf:Put the shelf on the correct shelf position. Makesur

6. Use the screws to tighten the forks.7. Put the tip of the spit into the turnspit hole.Refer to "Product description" chapter.8. Put the f

etc.) for your cookware, recipes and quantitieswhen you use this appliance.COOKING TABLESCasserolesFood Quantity (kg) Temperature (°C) Time (min) Shel

Food Quantity (kg) Temperature (°C) Time (min) Shelf positionDorade 0.8 - 1.4 180 30 - 40 2Trout 1.0 - 2.0 180 25 - 30 2PizzaFood Quantity (kg) Temper

Food Quantity (kg) Grill position Time (min) Shelf positionRibs1)2.0 - 2.5 half 45 - 60 3Burgers1)3.0 - 3.5 max. 15 - 20 3Mackerel1)2.5 - 3.0 half 20

Do not loosen the screws.1. Open the door fully.2. Lift and turn the levers on the two hinges tillthey stop (until you reach the pins).Avoid placing t

outer door, and push the inner door against thetop edge of the door. Lift the inner door.2237. Clean the oven door with water and soap.Clean the inner

TROUBLESHOOTINGWARNING! Refer to Safety chapters.WHAT TO DO IF...Problem Possible cause RemedyThere is no spark when you tryto activate the spark gene

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for

SERVICE DATAIf you cannot find a solution to the problem yourself,contact your dealer or an Authorised ServiceCentre.The necessary data for the servic

OTHER TECHNICAL DATAAppliance category: II2H3B/PLPG: G30 (3B/P) 28-30 mbarNatural Gas: G20 (2H) 20 mbarBYPASS DIAMETERSBURNER Ø BYPASS 1/100 mmAuxilia

GAS CONNECTIONWARNING! Before you connect thegas, disconnect the appliance from theelectricity supply or switch off the fusein the fuse box. Close the

4. Replace injectors with the ones necessary forthe type of gas you use.5. Replace the rating plate (it is near the gassupply pipe) with the one for t

124. Release the burner injector with a 7 mm socketspanner and replace it with a right one.Assemble the burner in a revers sequence.Replace the gas ty

A2. Release the burner injector with a 7 mm socketspanner and replace it with a right one.3. Assemble the burner in a reverse sequence.Before you fix

ELECTRICAL INSTALLATIONWARNING! The manufacturer is notresponsible if you do not follow thesafety precautions from Safetychapters.This appliance is su

27

WWW.ZANUSSI.COM/SHOP867342076-A-072018

• Do not install the appliance behind a decorative door in order toavoid overheating.• Do not install the appliance on a platform.• Do not operate the

guards incorporated in the appliance. The use of inappropriateguards can cause accidents.SAFETY INSTRUCTIONSThis appliance is suitable for the followi

• Do not let the appliance stay unattended duringoperation.• Deactivate the appliance after each use.• Be careful when you open the appliance doorwhil

• Glass lid can shatter, when heated (ifapplicable).• Keep the lid glass open, while the oven is inoperation (if applicable).INTERNAL LIGHTINGWARNING!

COOKING SURFACE LAYOUT1 36 4521Auxiliary burner2Steam outlet - number and position depend onthe model3Semi-rapid burner4Semi-rapid burner5Triple Crown

HOB - DAILY USEWARNING! Refer to Safety chapters.IGNITION OF THE HOB BURNERAlways light the burner before you puton the cookware.WARNING! Be very care

HOB - HINTS AND TIPSWARNING! Refer to Safety chapters.COOKWAREWARNING! Do not put the same panon two burners.WARNING! Do not put unstable ordamaged po