Zanussi ZGF982CX User Manual download pdf (Page 12)

A. IGNITOR SWITCH

B. IGNITOR UNIT

220/240

Wiring Diagram

— Connect the green and yellow (earth) wire to

the terminal in the plug which is marked with

the letter 'E' or the earth symbol or

coloured green and yellow.

— Connect the blue (neutral) wire to the terminal

in the plug which is marked with the letter 'N'

or coloured black.

— Connect the brown (live) wire to the terminal

in the plug which is marked with the letter 'L'

or coloured red.

NOTE:

The earth wire should be about 2 cm. longer

than the live and neutral wires.

Upon completion there must be no cut, or stray strands

of wire present and the cord clamp must be secure over

the outer sheath.

A cut off plug inserted into a 13 amp socket is

a seriuos safety (shock) hazard. Ensure that

the cut off plug is disposed of safely.

Permanent Connection

In the case of a permanent connection, it is

necessary that you install a double pole switch

between the hob and the electricity supply (mains),

with a minimum gap of 3 mm. between the switch

contacts and of a type suitable for the required load in

compliance with the current electric regulations.

The switch must not break the yellow and green earth

cable at any point.

Ensure that the hob supply cord does

not come into contact with surfaces with

temperatures higher than 50 deg. C.

☞

1 ... 11 12 13 14 15 16

No comments

Zanussi ZGF982CX User Manual Page 12