Zanussi ZGG782CTX User Manual

ENUser manualHobZGG782CTGB

Provision for ventilationDetailed recommendations are contained in thefollowing British Standards Codes Of Practice:B.S. 6172/ B.S. 5440, Par. 2 and B

Rigid connection:Carry out connection by using metal rigid pipes(copper with mechanical end).Injectors replacement1. Remove the pan supports.2. Remove

The appliance is supplied with a 3 core flexiblepower cable requiring a 13 amp plug fitted witha 13 amp or 3 amp fuse dependent on theload. You must p

min 20 mm(max 150 mm)30 mm60 mmbaA) Removable panelB) Space for connectionsKitchen unit with ovenThe hob recess dimensions must obey the indi-cation a

Gas burnersBURNERNORMALPOWERREDUCEDPOWERNORMAL POWERNATURAL GASG20 (2H) 20 mbarLPG(Butane/Propane) G30/G31 (3B/P) 30/30 mbarkW kWinj. 1/100mmm³/hinj.

15www.zanussi.com

www.zanussi.com/shop 397179901-C-252012

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Product description _ _ _ _ _ _ _ _ _ _ _ _

• Unattended cooking on a hob with fat or oil can be dangerousand may result in fire.• Never try to extinguish a fire with water, but switch off the a

• The electrical installation must have an isola-tion device which lets you disconnect the ap-pliance from the mains at all poles. The isola-tion devi

• Make sure the flame does not go out whenyou quickly turn the knob from the maximumto the minimum position.• Make sure pots are centrally positioned

1. Turn the control knob counterclockwise tothe maximum position ( ) and push itdown.2. Keep the control knob pushed for approxi-mately 5 seconds;

Warning! Always turn the flame down orswitch it off before you remove the pansfrom the burner.Helpful hints and tipsWarning! Refer to "Safety inf

and dry them carefully before you put themback.• Wash stainless steel parts with water, andthen dry them with a soft cloth.• The pan supports are not

If there is a fault, first try to find a solution to theproblem yourself. If you cannot find a solution tothe problem yourself, speak your dealer or t