Zanussi ZGH62414WA User Manual

GETTING STARTED?EASY.User ManualZGH62414WAZGH62414XAZGH62414XSEN User ManualHobGB IE MT

7.8.AA) supplied bracket9.CAUTION! Install the appliance onlyon a worktop with flat surface.POSSIBILITIES FOR INSERTIONThe panel installed below the h

PRODUCT DESCRIPTIONCOOKING SURFACE LAYOUT21 341Rapid burner2Semi-rapid burner3Auxiliary burner4Control knobsCONTROL KNOBSymbol Descriptionno gas suppl

B. Burner crownC. Ignition candleD. ThermocoupleIGNITION OF THE BURNERAlways light the burner before you puton the cookware.WARNING! Be very careful w

DIAMETERS OF COOKWAREUse cookware with diametersapplicable to the size of burners.BurnerDiameter of cook-ware (mm)Rapid 180 - 260BurnerDiameter of coo

TROUBLESHOOTINGWARNING! Refer to Safety chapters.WHAT TO DO IF...Problem Possible cause RemedyThere is no spark when you tryto activate the spark gene

LABELS SUPPLIED WITH THE ACCESSORIESBAGStick the adhesive labels as indicated below:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NO.03

OTHER TECHNICAL DATATOTAL POW-ER:Gas original: G20 (2H) 20 mbar 8 kWGas replace-ment:G30 (3+) 28-30 mbar 567 g/hG31 (3+) 37 mbar 557 g/hElectric suppl

ENERGY EFFICIENCYPRODUCT INFORMATION ACCORDING TO EU 66/2014Model identification ZGH62414WA,ZGH62414XA,ZGH62414XSType of hob Built-in hobNumber of

18

19

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for

WWW.ZANUSSI.COM/SHOP867345826-A-322018

• NEVER try to extinguish a fire with water, but switch off theappliance and then cover flame e.g. with a lid or a fire blanket.• CAUTION: The cooking

• Do not install the appliance adjacent to a dooror under a window. This prevents hot cookwarefalling from the appliance when the door or thewindow is

• Do not let the appliance stay unattended duringoperation.• Set the cooking zone to “off” after each use.• Do not put cutlery or saucepan lids on the

INSTALLATIONWARNING! Refer to Safety chapters.BEFORE THE INSTALLATIONBefore you install the hob, write down theinformation bellow from the rating plat

Make sure that the main connection pipe does notexert any strain on the hob.If you use flexible metal pipes make sure that theyagree to ISO 10380 and

WARNING! Make sure the flame doesnot go out when you quickly turn theknob from the maximum position to theminimum position.ELECTRICAL CONNECTION• Do n

A B1. Connect the green and yellow (earth) wire tothe terminal which is marked with the letter 'E',or the earth symbol , or coloured green