Zanussi ZYB594X User Manual download pdf (Page 31)

electrolux 31

31

Fig. 22

To programme the pyrolytic cleaning

cycle (delayed start, automatic stop)

If you desire, you can programme the starting and

ending time of the pyrolytic cleaning cycle.

1. Press button to switch on the oven. Press

the button as often as necessary, until the

“Pyro“ function symbol (level 1 - P 2)

appears in the display.

Simultaneously the “P I” writing and the

symbol will flash in the display and

an acoustic signal will be emitted. This means

that, before activating the pyrolytic cleaning

function, you have to remove all the oven

accessories.

2. The Cooking Duration symbol will flash

for some seconds; during this time push ' '

or ' ' buttons to select the pyrolytic 1 (P 1) or

pyrolytic 2 (P 2) function.

3. Once you have chosen the desired pyrolytic

function, the “P1” or "P2" writing will flash in

the display, alternating with the symbol

, waiting for confirmation to start the

pyrolytic cleaning function.

At this time, push the time function button

(Fig. 22). The "End of Cooking"

symbol and the arrow symbol will

flash. The control panel will display the end

of the cleaning cycle (that is, the actual time +

cooking duration time).

Push ' ' or ' ' buttons to select the required

end of cycle time (Fig. 22). After a few seconds,

the “Pyro” writing and the symbol

will stop flashing, the acoustic signal will stop

while the Cooking Duration symbol will

flash until the pyrolytic cleaning cycle start.

4. At the programmed time, the pyrolytic cleaning

cycle will automatically start.

5. When temperature inside the oven reaches

300°C, the door lock will be activated and the

related symbol will be displayed.

At the end of the pyrolytic cleaning process, the

display shows the time of day. The oven door is

locked.

Once the oven has cooled down, an acoustic signal

will be emitted and the door will unlock.

To stop the pyrolytic cleaning cycle at any time,

press button .

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Comments to this Manuals

No comments