Zanussi ZTB271 User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
What to do if ...
Problem Possible cause Remedy
Dryer does not work.
Mains plug is not plugged in or fuse
is not working correctly.
Plug in at mains socket. Check fuse
in fuse box (domestic installation).
Loading door is open. Close loading door.
Have you pressed the START /
PAUZE (START PAUSE) button?
Press the START / PAUZE (START
PAUSE) button again.
Drying results unsatisfactory.
Wrong programme selected.
Select a different programme the
next time you dry (see “Programme
chart” chapter).
Fluff filter clogged. Clean fluff filter.
Overloading of laundry.
Observe recommended loading
volumes.
Ventilation slots covered up. Uncover ventilation slots.
Residue on inside surface of drum
or drum ribs.
Clean inside surface of drum and
drum ribs.
Conductance of water at installa-
tion site differs from standard set-
ting of machine.
1)
Re-programme standard setting for
degree of drying (see ‘Machine set-
tings’ chapter)
1)
.
Loading door does not close.
Filter not in place
2)
. Install filter into place
2)
.
Drying cycle ends shortly after pro-
gramme starts.
Not enough washing loaded or
washing loaded is too dry for se-
lected programme.
Select time programme or higher
drying level (e.g. EXTRA DROOG
(EXTRA DRY) instead of KAST-
DROOG (STORAGE DRY)).
Drying cycle lasts an unusually long
time. Note: After around 5 hours the
drying cycle ends automatically.
Filter clogged. Clean filter.
Load volume too big. Reduce load volume.
Laundry insufficiently spun. Laundry must be adequately spun.
Particularly high room temperature.
Temporary switching off of the com-
pressor to avoid overload.
Automatic process, there is no fault
with the appliance. If possible, low-
er the room temperature.
1) Only dryers with conductance programming
2) Only dryers with removable filter
Machine settings
Setting Implementation
11
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Comments to this Manuals

No comments