Zanussi ZTE7101PZ User Manual download pdf (Page 11)

SETTINGS

A B C D

A. Délicat (Delicate) button

B. Anti-froissage (Anticrease) button

C. Alarme (Buzzer) button

D. Départ/Pause (Start/Pause) button

BUZZER ON/OFF

To deactivate or activate the acoustic signals, press

and hold for approximately 2 seconds touch

buttons (A) and (B) at the same time.

ADJUSTMENT OF THE REMAINING LAUNDRY

MOISTURE DEGREE

To change the default degree of the remaining

moisture of the laundry:

1. Use the programme knob to set any

programme.

2. Wait approximately 8 seconds.

3. Press and hold buttons (B) and (D) at the same

time.

One of the these indicators comes on:

•

Fin/Anti-froissage(End/Anti-

crease) - the maximum dry laundry

• Séchage(Drying) - the more dry

laundry

•

Fin/Anti-froissage(End/Anti-

crease) and Séchage(Drying) the

standard dry laundry

4. Press the button (D) again and again until the

indicator of the correct level comes on.

5. To confirm the adjustment, press and hold

buttons (B) and (D) at the same time for

approximately 2 seconds.

BEFORE FIRST USE

Before you use the appliance for the first time:

• Clean the tumble dryer drum with a moist cloth.

• Start a 1 hour programme with moist laundry.

DAILY USE

START A PROGRAMME

1. Prepare the laundry and load the appliance.

CAUTION! Make sure that when

you close the door, the laundry

does not get caught between the

appliance door and the rubber

seal.

2. Set the correct programme and options for the

type of load.

3. Press the Départ/Pause (Start/Pause)

touchpad.

The programme starts.

CHANGE A PROGRAMME

1. Turn the Programme knob to OFF

2. Set the programme.

AT THE END OF THE PROGRAMME

When the programme is completed:

• An intermittent acoustic signal operates (If the

Buzzer function is on).

• The indicators Fin/Anti-froissage(End/Anti-

crease) and Filtre(Filter) comes on.

• The Départ/Pause (Start/Pause) indicator is on.

The appliance continues to operate with the crease

guard phase for approximately other 30 minutes.

The crease guard phase removes creases from

your laundry.

You can remove the laundry before the crease

guard phase is completed. We recommend, for

better results, that you remove the laundry when the

phase is almost completed or completed.

When the crease guard phase is completed:

• Départ/Pause (Start/Pause) indicator goes off.

1. Turn the Programme knob to

OFF

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Comments to this Manuals

No comments

Zanussi ZTE7101PZ User Manual Page 11

Comments to this Manuals

Related products and manuals for Tumble dryers Zanussi ZTE7101PZ