Zanussi ZWT71401WA User Manual

GETTING STARTED?EASY.User ManualZWT 71401 WAEN User ManualWasher Dryer

PROGRAMMES FOR TIMED DRYINGDryness Level Type of fabric Load (kg)Spinspeed(rpm)Suggestedduration(mins)Extra DryFor towelling materialsCottons and Line

Programmes Load (kg)Energy con-sumption(kWh)Water con-sumption (litre)Approximate pro-gramme duration (mi-nutes)Synthetics 40°C 3.5 0.55 42 90Delicate

DOOR LOCKED INDICATOR DOORThe indicator Door shows when the door can beopened:• The indicator is on: the door cannot be opened.• The indicator flashes

USING DETERGENT AND ADDITIVES1. Measure out the de-tergent and the fabricconditioner.2. Put the detergentand the fabric condi-tioner into the com-part

CAUTION! If the temperature andlevel of the water in the drum are toohigh and the drum still rotates, youcannot open the door.To open the door during

DAILY USE - DRYING ONLYWARNING! Refer to Safety chapters.This appliance is an automatic washerdryer.DRYING SETTINGThe recommended load size is 4 kg fo

To have a good drying performance do not exceed the maximum dryingloads recommended in the usermanual. Do not set a spin speedlower than the automatic

– powder detergents for all types of fabric,– powder detergents for delicate fabrics (40°C max) and woollens,– liquid detergents, preferably for lowte

CARE AND CLEANINGWARNING! Refer to Safety chapters.EXTERNAL CLEANINGClean the appliance with soap and warm wateronly. Fully dry all the surfaces.CAUTI

A B• Place a containerclose to the pump (A)to collect any spillage.• Pull out the emergen-cy emptying hose (B),place it in the contain-er and remove i

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for

FROST PRECAUTIONSIf the appliance is installed in an area where thetemperature can be less than 0° C, remove theremaining water from the inlet hose an

POSSIBLE FAILURESProblem Possible solutionThe programme does notstart.• Make sure that the mains plug is connected to the mains socket.• Make sure tha

Problem Possible solutionThe washing results arenot satisfactory.• Increase the detergent quantity or use a different detergent.• Use special products

• Remove the powersupply cable and thedraining hose from thehose holders on therear of the appliance.12• Unscrew the threebolts.• Slide out the releva

• Connect the hose to atap with a 3/4”thread.Always use the hosesupplied with the ap-pliance.• The inlet hose must not be lengthened. If it istoo shor

600 mm555 mm596 mm170 mm75 mm100 mm60 mmmin.830 mmmin.560 mm818 mmWe recommend that you keep thepackaging and the transit bolts for anymovement of the

Ø 35 mm14 mm16-22 mm22±1,5 mm416mmX595-598 mmHingesTo mount the hinges drill two holes (dia. 35 mm,depth 12.5-14 mm depending on the depth of doorfurn

ABCEDTECHNICAL DATADimension Width/ Height/ Depth/ To-tal depth596 mm/ 820 mm/ 544 mm/ 560 mmElectrical connection VoltageOverall powerFuseFrequency23

WWW.ZANUSSI.COM/SHOP132905083-A-372017

• Connect the mains plug to the mains socket only at the end ofthe installation process. Make sure that the mains plug isaccessible after installation

• Items such as foam rubber (latex foam), shower caps,waterproof textiles, and rubber backed articles and clothes, orpillows fitted with foam rubber p

• Always use a correctly installed shockproofsocket.• Do not use multi-plug adapters and extensioncables.• Do not pull the mains cable to disconnect t

PRODUCT DESCRIPTIONAPPLIANCE OVERVIEW1234561Detergent dispenser2Control panel3Door handle4Rating plate5Drain pump filter6Feet for levelling the applia

CONTROL PANELCONTROL PANEL DESCRIPTION14001200900700123456781314151617181922232420219101112EcoDoorRinseHoldQuickWashSpinOptionesuaP/tratSEasyIronExtra

After the programme start, the set delayappears for few seconds, then the durationof the set programme is displayed again.• Alarm codesIf the applianc

ProgrammeTemperature rangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)20Dry - Cottons4 kg Drying programme for cot